Civil Engineering 6 PDH Credits 100% Board Accepted

Stormwater Management, Urban Runoff & HEC-RAS Hydrologic Modeling

★★★★★ 4.92 (940 PEs completed)
•
Self-Paced PDF + Quiz

Course Description

Covers advanced hydrology and hydraulics calculations for civil and site development engineers. Learn to calculate design peak discharges using the Rational Method and NRCS TR-55, size detention and retention basins with low-impact development (LID) features, design culverts and spillways, and set up 1D steady and 2D unsteady flow models in USACE HEC-RAS.

Learning Objectives

Upon successful completion of this continuing education course, the licensee will be able to:

  • Calculate runoff peak flow rates using the Rational Formula, NRCS Curve Number method, and TR-55 unit hydrographs
  • Design stormwater retention and wet detention ponds incorporating water quality treatment volumes
  • Model open channel river hydraulics and floodplain extents using HEC-RAS 6.x
  • Integrate Green Infrastructure and Best Management Practices (BMPs) to meet EPA NPDES Phase II permits

Course Syllabus & Curriculum Modules

Part 1

Module 1: Hydrologic Runoff & Precipitation

  • • IDF curves & design storms
  • • TR-55 time of concentration
  • • Rational method limitations
Part 2

Module 2: Stormwater Detention Basin Design

  • • Stage-storage routing (Modified Puls)
  • • Multi-stage outlet structures
  • • Emergency spillways
Part 3

Module 3: HEC-RAS River Analysis System

  • • Geometry creation and cross-sections
  • • Manning's n calibration
  • • 1D steady flow vs. 2D rain-on-mesh

Online Quiz & Certificate Issuance

📝
30 Multiple-Choice Questions Based directly on the included study guide document.
🎯
80% Passing Score Required Mandated by state boards for CPC compliance.
🔄
Free Unlimited Retakes Review and retake instantly at zero extra charge.
📜
Instant PDF Certificate Includes Certificate ID and State Board validation code.

Course Instructor & Author

Dr. Gregory Thorne, PE, CFM

Principal Water Resources Engineer
PhD Civil Engineering, PE (TX, FL, NC, CA), CFM
100% Board Acceptance Guarantee
If any state licensing board rejects our PDH course for your license renewal, we will issue a full 100% prompt refund. Zero risk to you.